Riley 15/6 MPH. (1935)

The MPH model was eventually available with all three versions of the six-cylinder engine, the 15/6 being the last and apparently the shortest-run production model. In all there were probably less than half a dozen 15/6 MPHs (although there are several replicas now boosting that figure), and as some of these are thought to be re-engined 14/6 or re-bodied TT Sprites, converted by Riley, the true figure could be very small indeed.
The 15/6 engine used in the MPH was not the definitive unit used through until 1938, but in fact a rebored 14/6 unit, which therefore shared the bore and stroke of the new engine, whilst retaining the layout of the older engine. This hybrid unit was also fitted to the Stelvio and perhaps a handful of Winchesters.
The 15/6 MPH was only briefly available, before the Sprite 12/4 was launched the following year, itself a re-worked MPH with the smaller engine and a lower price.

Chassis Type: 44T

ENGINE

TRANSMISSION

6cyl ohv
RAC Rating14.3hp
Bore 62 Stroke 95.2
Firing Order 1, 5, 3, 6, 2, 4.
Capacity 1726cc
56bhp at 4800rpm
Compression Ratio 7.1:1
Carburation 2SU
4-speed Preselector
Top Gear ratio 5:1
3rd Gear ratio 6.25:1
2nd Gear ratio 7.5:1
1st Gear ratio 13.35:1
Reverse Gear ratio 22.99:1

or 'silent third' gearbox.
4.77:1
5.95:1
7.15:1
11.78:1
18.51:1

SUSPENSION

Semi-elliptic all round

BRAKES

Riley Continuous cable with cam operated shoes
15" Drums.

PERFORMANCE

Max speed 89mph

DIMENSIONS

Wheelbase 8'1.5" (aprx 2370mm)
Track 4' (aprx 1210mm)
Length 12' (aprx 3660mm)
Width 4'9½" (aprx 1440mm)
Fuel Tank 15 galls.
Wheels Dunlop Centre lock wire 3.0x19"
Tyres 5.0x19
Weight 18cwt

PRICE

44T £550